MPC9772 |
RFQ for MPC9772 Required Field |
 |
| Technical/Catalog Information | MPC9772AE |
| Vendor | IDT, Integrated Device Technology Inc |
| Category | Integrated Circuits (ICs) |
| Type | PLL Clock Generator |
| Voltage - Supply | 3.135 V ~ 3.465 V |
| Number of Outputs | 12 |
| Input | LVCMOS |
| Output | LVCMOS |
| Frequency-Max | 240MHz |
| Package / Case | 52-LQFP |
| Packaging | Tray |
| Operating Temperature | 0°C ~ 70°C |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | MPC9772AE MPC9772AE MPC9772AEIDT ND MPC9772AEIDTND MPC9772AEIDT |
| Product | Manufacturers | Pack | D/C |
| MPC9772 | - | - | - |
The MPC9772 utilizes PLL technology to frequency lock its outputs onto an input reference clock. Normal operation of the MPC9772 requires the connection of the PLL feedback output QFB to feedback input FB_IN to close the PLL feedback path. The reference clock frequency and the divider for the feedback path determine the VCO frequency. Both must be selected to match the VCO frequency range. The MPC9772 features an extensive level of frequency programmability between the 12 outputs as well as the output to input relationships, for instance 1:1, 2:1, 3:1, 3:2, 4:1, 4:3, 5:1, 5:2, 5:3, 5:4, 5:6, 6:1, 8:1 and 8:3.
The QSYNC output will indicate when the coincident rising edges of the above relationships will occur. The selectability of the feedback frequency is independent of the output frequencies. This allows for very flexible programming of the input reference versus output frequency relationship. The output frequencies can be either odd or even multiples of the input reference. In addition the output frequency can be less than the input frequency for applications where a frequency needs to be reduced by a nonbinary factor. The MPC9772 also supports the 180° phase shift of one of its output banks with respect to the other output banks. The QSYNC outputs reflects the phase relationship between the QA and QC outputs and can be used for the generation of system baseline timing signals.
The REF_SEL pin selects the internal crystal oscillator or the LVCMOS compatible inputs as the reference clock signal. Two alternative LVCMOS compatible clock inputs are provided for clock redundancy support. The PLL_EN control selects the PLL bypass configuration for test and diagnosis. In this configuration, the selected input reference clock is routed directly to the output dividers bypassing the PLL. The PLL bypass is fully static and the minimum clock frequency specification and all other PLL characteristics do not apply.
The
Features |
| • 1:12 PLL based low-voltage clock generator• 3.3V power supply• Internal poweron reset• Generates clock signals up to 240 MHz• Maximum output skew of 250 ps• On-chip crystal oscillator clock reference• Two LVCMOS PLL reference clock inputs• External PLL feedback supports zero-delay capability• Various feedback and output dividers (see application section)• Supports up to three individual generated output clock frequencies• Synchronous output clock stop circuitry for each individual output for power down support• Drives up to 24 clock lines• Ambient temperature range 0 to +70• Pin and function compatible to the MPC972 |
| Symbol | Characteristics | Min | Max | Unit | Condition |
| VCC | Supply Voltage | -0.3 | 3.9 | V | |
| VIN | DC Input Voltage | -0.3 | VCC+0.3 | V | |
| VOUT | DC Output Voltage | -0.3 | VCC+0.3 | V | |
| IIN | DC Input Current | ±20 | mA | ||
| IOUT | DC Output Current | ±50 | mA | ||
| TS | Storage Temperature | -65 | 125 |
a. Absolute maximum continuous ratings are those maximum values beyond which damage to the device may occur. Exposure to these conditions or conditions beyond those indicated may adversely affect device reliability. Functional operation at absolute-maximum-rated conditions is not implied.
